There are many factors that interfere with the actual effect of metal waste discharge. Some key factors include:

One, metal cutting die is there are three parts in the work, respectively is the metal feeding part, metal cutting part, metal feeding part, the part in the work is not unique, resulting in waste can not be specified discharge, the next die moving link will cause waste splashes;

Two, some hardware grinding tools in daily maintenance will spray paint grease, lead to metal waste surface will also stick to oil stains, not easy to discharge;

Three, some hardware waste is very small, will card to the discharge door open position, so that the discharge door does not open or close tight, waste splashes out;

The interior space of the discharging mechanism is usually not very large, which interferes with the inclination of the discharging surface of the discharging groove and the size of the discharging door, and the actual effect of discharging is not ideal.

This product has the following advantages:

(1) This product can reasonably obtain cut wastes according to the aggregate funnel and aggregate tank, so as to make the waste discharge specified, reasonably avoid the reduction of waste cost, carry out centralized waste discharge, and improve the high efficiency of waste discharge.

(2) According to the setting of adhesive strips and brushes at the bottom of the aggregate funnel, this product reasonably cleans up the oil-stained waste in the aggregate trough to ensure the reasonable discharge of waste.